______
The worlds smallest, lightest, six band HF CW rig
Now with DIGITAL MODE capabilities*
______
* requires external PC interface (not supplied) and "Pocketdigi" digital mode PC software
Features:
3.1" x 2.2" board fits into standard Altoids tin.
Main board + one filter board weighs 1 ounce
80/40/30/20/17/20 meter operation using plug in filter modules (supplied)
AD9834 DDS VFO for rock solid frequency stability
Sensitive 0.2 uV superheterodyne receiver
Double tuned receiver input filter for excellent image and out of band signal rejection
Four crystal IF filter and 600 Hz audio filter provide excellent CW selectivity and opposite sideband rejection
Audio AGC and limiting eliminates need for volume control.
Simple four push button, multi-function switches operate the rig.
RIT/XIT split modes
Unique "Direct Frequency Entry" using the paddle allows moving directly to any frequency in the band.
Single digit seven segment LED display for frequency readout and visual feedback, in addition to Morse annunciations.
Built in 5 to 35 wpm Iambic keyer, selectable A or B mode operation
Three keyer memories, up to 124 character total.
Reverse paddle sense option
Alternative "Stealth" paddle option allow use of tuning switches as paddles - saves additional weight by not needing an external paddle or use in emergency when external paddle or cable breaks!
2.5 watt power output with 9 volt supply, over 4 watts with 12 volt supply - on all bands. Typical PA efficiency is over 70%
Modest 35 ma receive current for long battery life.
Operates down to 5.5 votes and transmitter still puts out usable power - 800 mw!
NOTE: Due to extensive use of Surface Mounted Parts (SMT), this kit is recommended for experienced builders, preferably with at least some SMT experience. That being said, if you have good soldering skills, decent eye sight and steady hands, you should have no problem building the rig.
Orders accepted starting September 1st, 2007. Initial offering of 100 kits, which will likely sell out quickly. Please confirm availability before ordering after September 7th. An additional 100 kits will be produced as soon as possible.
Price: $190.00 post paid (US/Canada)
USA orders: Check or Money Order only please! Also, include your email address in case I need to get back to you.
DX orders: May use PayPal. Paypal price $200.00. [$190.00 + $10.00 to cover shipping] paypal email address <mycall>@ moose.ncia.net [replace <mycall> with kd1jv] Free shipping if US funds airmailed direct.
Send check or MO to:
Steven Weber, KD1JV
633 Champlain St
Berlin, NH 03570 USA